Creating a shape to take riders’ skills to the next level was the goal behind the State 2.0. Learning from other asymmetrical designs, we found that creating a shorter but more effective edge on a rider’s toe-side made hard to learn wake jumps a lot easier. This is because there is less rail to initiate when applying toe-side pressure. Once set, the smoother toe-side transition is then held by the State 2.0’s thinner profile molded-in fins, creating less drag and a better release off the top of the wake. Subtle Molded-In Toe-Side Footbed Risers were also added to help a rider create more leverage when pressure is applied. The longer, more traditional heel-side edge compliments this asymmetrical design by allowing the natural body position of a rider to generate stability and speed into the wake without a loss of pop due to reduced surface area.
ABRUPT CONTINUOUS ROCKER
This rocker line adds a little more kick to the speed that so many riders look for. The Abrupt Continuous rocker line transitions to a slightly exaggerated tip and tail rocker, creating added pop without sacrificing speed into the wake.
Integrating the top and bottom fiberglass layers into one. Generating a more durable board on side impacts to prevent delamination.
Our fiberglass is available in 3 weights depending on the board. Over time, traditional woven glass fibers will separate. With layered glass every Hyperlite deck will have the same pop off the double up year after year.
MOLDED IN FINS
Non detachable fins designed into the board's shape for added stability and solid edge hold.
BIOLITE 3 CORE
The secret recipe we have been perfecting since day one. This core material is the gold standard in the industry and used throughout our line. Biolite 3 is our lightest and most durable formula to date.
Visible to the eye, the shape differs on each side of the board providing ride characteristics suitable for beginners to enhance toe-side edging.
Delivers a more secure fit of the bolts to the inserts, improving bolt retention keeping binding hardware locked down.
Aaron Stumpf leads the Hyperlite research and development team shaping many of our bestselling wakeboards and surfers. A product design specialist with 25 years of experience, Aaron also creates our manufacturing processes and innovative construction formulas.
MOLDED-IN TOE SIDE FOOTBED RISERS
Elevation of the board's top deck shape under the toe-side platform which increases toe-side edging effectiveness.